AEG piston weight gain set

Enhance the performance of your AEG with the Weight Increase Set from EPeS. By adding weight to the piston, you achieve higher and more stable performance when using heavier ammunition, which is particularly desirable in DMR rifle builds and AEG snipers.
A heavier piston travels more slowly through the cylinder and also puts more strain on the front of the gearbox and cylinder head. This situation can be addressed by installing a Sorbopad on the cylinder head, but it may affect the proper engagement of the piston teeth (AOE), creating a potential lack of space under the head for traditional spacers.
EPeS is aware of this and has created a set precisely for these situations, with spacers installed inside the piston.
Adequate air volume in the cylinder in proportion to the barrel length is also essential.

The set includes an insert for the piston head and 3 weight pieces that replace the flange with a bearing in the piston. You can use only certain elements of the set to optimize the piston weight as needed. The total weight of the set is 14.4 g.

The set includes:

• Insert for the piston head: 2.7 g
• Bearing replacement: 7.0 g
• Small ring behind the bearing: 2.35 g (2 pcs)
• 2x Extended screw for the piston head (M3x16 and M3x20 with hex socket head).