ORL-193 Osight R RIS Mount, T1 / T2 Footprint – 1.93" (High)

Installation and recommended tightening torques

• Attach the Osight R red dot sight to the ORL-193 mount using the four supplied M3 screws. The manufacturer specifies a maximum tightening torque of 12 in-lb per screw. Do not exceed this torque.
• Then position the mount at the desired location on the RIS rail and secure it using the M5 screw of the steel clamp. The maximum specified tightening torque for the M5 screw is 43 in-lb. Observing the specified torque helps ensure secure attachment without unnecessarily overloading the threads and mounting components.
• Warning: Always observe the specified tightening torques during installation and check that both the red dot sight and the mount are securely attached to the RIS rail before use.

• Max. M3 tightening torque: 12 in-lb
• Max. M5 tightening torque: 43 in-lb

Package contents

• 1× OLIGHT ORL-193 high RIS mount
• 1× T10 L-shaped Torx key
• 1× T25 L-shaped Torx key
• 4× M3 screw