Silent Cylinder Head

AirsoftParts Silent Cylinder Head With Integrated Impact Pad
Its design combines a sealing collar and a large rubber impact pad into a single component that seals the head inside the cylinder while helping to cushion mechanical shocks when the piston head impacts. Together with an additional sealing ring, it creates a double seal between the cylinder head and cylinder. The impact pad has a hardness of 80 ShA. The duralumin body features an electroless nickel-plated finish that creates a uniform and very smooth surface with high wear and corrosion resistance. According to the manufacturer, the surface hardness after plating reaches 660–850 HV (58–63 HRC). The low friction of the nickel-plated surface also promotes smooth nozzle movement over the outlet section of the cylinder head. The head weighs 10.1 g, is designed for V2 and V3 gearboxes, and the manufacturer specifies a maximum recommended spring of M170. Made in the Czech Republic.
Key Features

Sealing Collar and Impact Pad in One Piece
The integrated design combines a sealing collar with a rubber impact pad. A single component therefore seals the head inside the cylinder while helping to cushion impacts from the piston assembly.

Double Cylinder Head Seal
The combination of a sealing collar and sealing ring limits air leakage between the cylinder head and cylinder and supports proper sealing of the entire air seal system.

Large 80 ShA Impact Pad
The large rubber impact pad with a hardness of 80 ShA helps cushion and distribute mechanical shocks generated when the piston head impacts.

Electroless Nickel-Plated Finish
Electroless nickel plating creates a uniform, hard and smooth surface layer with high wear and corrosion resistance. The low-friction surface also promotes smoot..