AirsoftParts 6 mm Steel Bushings With Electroless Nickel Plating The design features relieved contact surfaces between the bushings and gears, intended to reduce the friction area and promote smooth operation of the gear train. The surface is treated with an electroless nickel coating with a hardness of 660–850 HV (58–63 HRC), which increases wear and corrosion resistance while providing a very smooth sliding surface. The bushings intentionally have no lubrication groove, whi...
Korábbi ár (az elmúlt 30 nap legalacsonyabb ára)
Áfával együtt, szállítási költség nélkül.
1 316,67 EUR / 1000 db
Ez a termék nincs a saját raktárunkban, de a beszállítónknál készleten van. A fizetésed után azonnal megrendeljük; 5–10 munkanapon belül megkapod.
Szállítás 12,95 EUR · 200 EUR felett ingyenes
Átmenetileg elfogyott
Add meg az e-mail-címedet, és egyszer írunk, amint a termék újra készleten lesz.
Írunk neked, amint a termék újra készleten lesz.
GLS futárral szállítjuk, amint a termék megérkezik a beszállítónktól (5–10 munkanap).
14 napos elállási jog és 60 napos visszaküldési jog; a visszaküldést a rendelésednél intézheted.
AirsoftParts 6 mm Steel Bushings With Electroless Nickel Plating
The design features relieved contact surfaces between the bushings and gears, intended to reduce the friction area and promote smooth operation of the gear train. The surface is treated with an electroless nickel coating with a hardness of 660–850 HV (58–63 HRC), which increases wear and corrosion resistance while providing a very smooth sliding surface. The bushings intentionally have no lubrication groove, which according to the manufacturer could contribute to wear on the gear axles. These are solid bushings without balls, suitable even for mechanically demanding builds; the manufacturer specifies use with springs up to M170.
Key Features
Solid Steel Construction
Steel bushings contain no balls or other moving parts and provide solid support for the gear axles inside the gearbox.
Electroless Nickel Plating
The nickel-plated surface reaches a hardness of 660–850 HV (58–63 HRC) and contributes to high wear resistance, corrosion resistance and low friction.
Relieved Contact Surfaces
Relief in the areas contacting the gears reduces the friction surface area and promotes smoother gear operation with lower mechanical losses.
No Lubrication Groove
The bushings have no lubrication groove that could create an edge acting against the gear axle. This design maintains a continuous sliding surface around the axle.
CNC-Machined in the Czech Republic
The bushings are machined on precision CNC machines in the Czech Republic, and the manufacturer recommends them for gearboxes with 6mm bearing seats and springs up to M170.
Technical Specifications
Type: bushings for AEG gearbox
Diameter: 6 mm
Gear axle diameter: 3 ..
Raktáron, azonnal szállítjuk
AA PIANO Wire Steel Spring for AEG - M120
Raktáron, azonnal szállítjuk
SP150 Progressive AEG Spring
Raktáron, azonnal szállítjuk
SP140 Progressive AEG Spring
Raktáron, azonnal szállítjuk
SP130 Progressive AEG SpringAirsoft Bazaar B.V. · Frankrijkstraat 4, 5171 PR Kaatsheuvel · Cégjegyzékszám (KvK) 99363534 · Adószám NL860943896B01
© Airsoft Bazaar - minden jog fenntartva 2026