V7 / M14 Cut-Off Lever

GUARDER V7 / M14 Cut-Off Lever
This small but important part ensures correct semi-auto operation – when firing in semi-auto mode, it works with the gear and trigger mechanisms and disengages the trigger mechanism after one operating cycle. A worn or damaged cut-off lever can therefore cause problems with semi-auto fire. GUARDER manufactures this part from steel with a DEFRIC surface treatment. It is primarily designed for the Tokyo Marui M14 and is also structurally compatible with M14 AEGs from CYMA, JG, AGM, Matrix and other models based on the Tokyo Marui V7 gearbox standard. During servicing, we recommend checking the free movement of the cut-off lever, its contact point with the gear and correct interaction with the trigger mechanism. With compatible guns from other manufacturers, minor differences caused by manufacturing tolerances may require inspection or fitting.
Key Features

Correct Semi-Auto Operation
The cut-off lever disengages the trigger mechanism after one cycle and is one of the important parts responsible for correct semi-auto operation.

Steel Construction
The cut-off lever is made of steel, which is suitable for the mechanical stress caused by repeated contact with the gear mechanism.

DEFRIC Surface Treatment
The steel part features a DEFRIC surface treatment designed for its working surface and contact with the adjoining parts of the mechanism.

For Tokyo Marui Standard M14
The part is designed for the Tokyo Marui M14 and structurally compatible AEG models from CYMA, JG, AGM, Matrix and other brands.

Replacement for a Worn Cut-Off Lever
The GUARDER GE-07-32 is suitable for replacing a worn or damaged cut-off lever, particularly if the gun no longer operates correctly in semi-auto mode.

Technical Specifications

Type: cut-off lever
Compatibility: ..