• Ingyenes szállítás 200 EUR felett
  • Saját készletből 12:00 előtti rendelés még aznap feladva
  • 60 napos visszaküldési jog
  • Hivatalos Airsoft Bazaar webáruház
/
FENIX

AER-05 Remote Switch

Suitable for use with a flashlight mounted on a long gun. Two noiseless switches are located at the end of the cable. One push-button with momentary press activation function and also the possibility of permanently lighting the flashlight (always up to maximum power) and the other flat pressure switch for switching on the strobe. The switch also has a velcro strap, which will help you place it anywhere on the gun. We recommend purchasing the Fenix ALG-05 mount to attach the s...

Ár hamarosan
Válassz változatot
Nem rendelhető
Készleten · kézbesítés csüt 12 nov. – szo 14 nov. (Magyarország)

Rendelésre: szállítás 5–10 munkanapon belül

Ez a termék nincs a saját raktárunkban, de a beszállítónknál készleten van. A fizetésed után azonnal megrendeljük; 5–10 munkanapon belül megkapod.

Átmenetileg elfogyott

Átmenetileg elfogyott

Add meg az e-mail-címedet, és egyszer írunk, amint a termék újra készleten lesz.

Írunk neked, amint a termék újra készleten lesz.

Cikkszám
FENIAER05
Gyártói cikkszám
FENIAER05
EAN
Ár hamarosan
AER-05 Remote Switch
Szállítás és visszaküldés

GLS futárral szállítjuk, amint a termék megérkezik a beszállítónktól (5–10 munkanap).

14 napos elállási jog és 60 napos visszaküldési jog; a visszaküldést a rendelésednél intézheted.

Szállítási idő országonként
Hollandia
1 munkanap
Belgium
1–2 munkanap
Luxemburg
2–3 munkanap
Németország
2–3 munkanap
Ausztria
3–4 munkanap
Franciaország
2–4 munkanap
Spanyolország
3–5 munkanap
Portugália
4–6 munkanap
Olaszország
3–5 munkanap
Lengyelország
3–5 munkanap
Magyarország
3–5 munkanap
Dánia
2–4 munkanap
Svédország
3–5 munkanap
Finnország
4–6 munkanap
Írország
3–6 munkanap
Egyesült Királyság
3–6 munkanap
Svájc
3–6 munkanap

Minden a szállításról Minden a visszaküldésről

Termékleírás

Suitable for use with a flashlight mounted on a long gun. Two noiseless switches are located at the end of the cable. One push-button with momentary press activation function and also the possibility of permanently lighting the flashlight (always up to maximum power) and the other flat pressure switch for switching on the strobe. The switch also has a velcro strap, which will help you place it anywhere on the gun. We recommend purchasing the Fenix ALG-05 mount to attach the switch to the gun rail.

Precise function of the flat pressure switch:

The round push-button switch allows momentary activation of the flashlight by squeezing it; by fully squeezing it, it can be turned on permanently in the classic way (always up to maximum power). Pressing the flat pressure switch switches the lamp into strobe mode. If the torch is switched off, the strobe mode can be switched on while the flat pressure switch is held.

Features:

  • Cable made of flexible polyurethane.
  • Cable length 23 centimetres.
  • End screw section made of high quality A6061-T6 aluminum alloy and hard Type-III anodized.
  • Highly wear-resistant flat-head thread.
  • Waterproof to IP68 standard.
  • Weight 40 grams.
  • Flat pressure switch and push-button tactical switch on the end of the cable with momentary push-pull activation.
  • Also included is Velcro to attach the switch to the weapon and nylon drawstrings to secure the cable.
  • Compatible with Fenix PD36R PRO, Fenix PD36 TAC, Fenix TK16 V2.0, Fenix TK20R V2.0, Fenix TK22 TAC, Fenix HT30R.
  • Attention, not compatible with older versions of the above flashlights!

Műszaki adatok

Általános
Szín
Black

Értékelések

Még nincs értékelés. Ismered ezt a terméket? Írd meg elsőként, mit gondolsz róla.

Mások ezt is megnézték

Airsoft Bazaar B.V. · Frankrijkstraat 4, 5171 PR Kaatsheuvel · Cégjegyzékszám (KvK) 99363534

© Airsoft Bazaar - minden jog fenntartva 2026

Responsible disclosure