Magazine Catch SAVIOR For MK23 Socom pistol types

We used tape, elastic, velcro, rubber bands, anything to stop us accidentally dropping magazines.
The days of adding these crude but effective modifications are over.
The Hadron Airsoft Designs "Saviour" system replaces the standard single lever action catch, with two slimline independently acting, sprung catches.
This means, in order to eject a magazine, both levers need to be activated, simultaneously.
We also changed the direction of the activation, so the catches are are also pulled into the grip, rather than pushed down.
This addition of the Saviour system to your Mk23, greatly reduces, if not eliminates, the dreaded Mk23 magazine loss in game.

Compatibility: Mk23 ASG, STI, TM SSX23, SSX303

Specification:

• CNC aluminium bodied catches designed by Hadron Airsoft Designs.
• Slimline contoured ergonomic design, perfectly matches the Mk23 form.
• Black Anodised finish, can be camouflaged easily if required by the user.
• Stainless matched springs used for operation.

Tools needed to installation:

Small hammer, 2mm to 3mm Pin punch (blunt screwdriver, or allen key could suffice), Small flat blade screwdriver, Lubricating oil (as required)

Instructions:

1. Ensure no BB are in the pistol, or magazine.
2. Remove the magazine from the pistol.
3. Use a 2mm to 3mm pin punch to tap out the existing catch pivot pin, and set aside.
4. Remove the existing catch and spring. Store these safely!
5. Unpack the new Hadron Airsoft Designs "Saviour" magazine system. Check there is a LEFT and RIGHT catch (mirror images) and 2 x springs.
6. Place the LEFT and RIGHT catches with the spring holes facing upwards, and the pivot pin holes aligned.
7. Insert one spring into each upward facing hole (1 in each) If required, add so..