AEG G36 Air Seal Upgrade Set

AirsoftParts Air Seal Set for G36 AEG
It includes a POM piston head, silent cylinder head, ported cylinder and a 25.2 mm nozzle. This combination is designed for G36-type AEG rifles and provides a practical solution when replacing a major part of the air seal system or building a new configuration. The ported cylinder has a reduced usable air volume compared with a full cylinder, while the piston head, cylinder head and nozzle form interconnected parts of the compression system. Proper operation depends on both their mutual air seal and correct matching with the specific gun. In particular, the 25.2 mm nozzle length should be compared with the original part before installation, as different G36 models and manufacturers may use different air seal component dimensions.
Key Features

Four Air Seal Components in One Set
The set combines a piston head, cylinder head, cylinder and nozzle, so the main interconnected air seal components do not need to be purchased separately.

POM Piston Head
The set includes a POM piston head that operates inside the cylinder and uses its seal to generate the required air pressure as the piston moves.

Silent Cylinder Head
The silent cylinder head closes the front section of the compression chamber, and its design also helps dampen the mechanical impact of the piston assembly.

Ported Cylinder
The ported cylinder has a reduced usable working volume compared with a full cylinder. Correctly matching the cylinder volume to the length and inner diameter of the barrel is important for efficient operation of the air seal system.

25.2 mm Nozzle
The set includes a 25.2 mm nozzle. Before installation, it is advisable to verify the required length for the specific combination of gearbox and hop-up chamber used in the G36.
..