Delayer Chip (3 mm)

RetroArms Delayer Chip 3 mm
The delayer chip is installed directly on the sector gear between the axle and pin. As the gear rotates, it extends the time during which the tappet plate remains in the rear position. This gives the magazine more time to properly feed a BB into the hop-up chamber. The cam is particularly suitable for setups with a high rate of fire or when dealing with feeding issues caused by weaker magazines. No glue or screws are required for installation.
Key Features

For V2, V3 and M249 Gearboxes
The cam is designed for V2, V3 and M249 gearboxes with a compatible sector gear.

Extended Feeding Time
The delay cam helps extend the time the hop-up chamber remains open, giving the magazine more time to feed a BB.

Improved Feeding at High Rate of Fire
It is suitable for setups with a high rate of fire, where feeding BBs can be more demanding in terms of timing.

Helps with Weaker Magazines
Keeping the tappet plate in the rear position for longer can help with BB feeding issues from weaker magazines.

Easy Installation
The cam is installed onto the sector gear and requires no glue or screws.

Technical Specifications

Type: Delayer chip
Axle Diameter: 3 mm
Compatibility: V2, V3 and M249 gearboxes
Location: Sector gear

Package Contents

1× 3 mm Delayer Chip