WarFET Powermodule

WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations.

Thanks to the Smart Trigger and Pre-cocking functions, tr igger response is similar to a real gun. The Programmable Burst (1-5 rounds) enables you to fire a p re-determined number of BBs. Another function is ROF Control, which allows you to reduce ROF, so you can use strong LiPo batteries, and still have ROF just like in a real rifle.

If your AEG bec omes jammed, the Smart Fuse protects the battery and the motor against damage. Moreover, with WARFET you get: Mosfet, ON/OFF Active Brake, Built-in self-test, Debouncing, and more. Many useful functio ns, great electrical specifications and conformal coating (military specifications: MIL-V-173C) make the AEG Control System able to meet the needs of most experienced airsoft players.

SUPER-EAS Y INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED

Key functions:
MOSFET transmits the energy from the battery directly to the motor, bypassing the traditional mechanical trigger contact s. As a result, the replica gains a higher rate of fire, faster trigger response, and the contacts a re protected against burn out.

ACTIVE BRAKE in SEMI Mode does not allow for compressing a pis ton after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. This is important, especially in AEG power upgrade.

ON/OFF ACTIVE BRAKE The Controller provides the option to decide if you want to use the Active Brake function. If you do not need this, you can turn it off easily. It will lead to imp roving the lifespan of your motor.
ELECTRONIC FUSE – the unit has thermal protection for increase d durability and in combination with a time-lag fuse, it fully protects your AEG installation.
DEBOUNCING - provides full compatibility with micro-switches. It ensures complete resistance to contact bounce and thanks to it the replica gain a bigger ROF, a faster trigger response and the MOSFET is less prone to overheating.

BATTERY P ROTECTION - against Over-Discharge of the Battery. The microprocessor monitors the battery voltage c onstantly. When the voltage drops down to a critical level, the Controller will not allow firing.

SMART TRIGGER - enables faster trigger response. It works with the ROF Control system. During t he first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF.

CONFIGURABLE FIRE SELECTOR - gives the option to program fire selector. There are five modes: