Name: V2 Lightning ETU Unit – Front Wiring
Brand: Perun
SKU: PERUN026

V2 Lightning ETU Unit – Front Wiring

Important Notes After use, always disconnect the battery, the unit draws a small standby current. Do not use batteries above 17 V, permanent damage may occur. After using pre-cocking, release the spring by switching to SEMI and holding the trigger for approx. 3 seconds. During installation, ensure proper wire routing to prevent damage when assembling the rifle. Package Contents Perun V2 Lightning ETU unit Front wiring with T-Deans connector (pre-installed on the unit) Install...

Ehhez még szükséged lesz

Termékleírás

Important Notes

After use, always disconnect the battery, the unit draws a small standby current.
Do not use batteries above 17 V, permanent damage may occur.
After using pre-cocking, release the spring by switching to SEMI and holding the trigger for approx. 3 seconds.
During installation, ensure proper wire routing to prevent damage when assembling the rifle.

Package Contents

Perun V2 Lightning ETU unit
Front wiring with T-Deans connector (pre-installed on the unit)
Installation and user manual

Műszaki adatok

Felépítés

Anyag: ABS / Plastic
Gearbox verzió: V2
MOSFET: YES

Energiaforrás és tár

Akkucsatlakozó: T-Dean
Battery included: NO

Általános

Variants: V2 Lighting ETU (Front)
Szín: White
Test/receiver anyaga: ABS / Plastic
Csatlakozó típusa: T-Dean
Processor unit: YES
Supported voltage: 7 V – 17 V
Supported batteries: Li-Pol, Li-Ion
Supported motors: Standard brushed and brushless BLDC
Supported modules: Clicker V2, Clicker V2 PRO, Speeder V2
Programming: Via trigger and fire selector
Li-Po alarm: 3,7 V per cell
Diagnostics and protection: Short circuit, gearbox lock-up, overheating protection, external magnetic field detection, LED error indication

V2 Lightning ETU Unit – Front Wiring

Ehhez még szükséged lesz

Termékleírás

Important Notes

Package Contents

Műszaki adatok

Értékelések

Mások ezt is megnézték