AirsoftParts 9 mm Steel Bushings With Electroless Nickel Plating The design features relieved contact surfaces between the bushings and gears, intended to reduce the friction area and promote smooth operation of the gear train. The surface is treated with an electroless nickel coating with a hardness of 660–850 HV (58–63 HRC), which increases wear and corrosion resistance while providing a very smooth sliding surface. The bushings intentionally have no lubrication groove, whi...
Ce produit n'est pas dans notre stock mais il est disponible chez notre fournisseur. Nous le commandons dès votre paiement ; vous le recevez sous 5–10 jours ouvrés.
Temporairement épuisé
Laissez votre adresse e-mail et nous vous écrirons une seule fois dès que ce produit sera de nouveau en stock.
Nous vous écrirons dès que le produit sera de nouveau en stock.
Expédié avec GLS dès que le produit arrive de notre fournisseur (5–10 jours ouvrés).
14 jours de rétractation et 60 jours pour retourner ; le retour se fait depuis votre commande.
AirsoftParts 9 mm Steel Bushings With Electroless Nickel Plating
The design features relieved contact surfaces between the bushings and gears, intended to reduce the friction area and promote smooth operation of the gear train. The surface is treated with an electroless nickel coating with a hardness of 660–850 HV (58–63 HRC), which increases wear and corrosion resistance while providing a very smooth sliding surface. The bushings intentionally have no lubrication groove, which according to the manufacturer could contribute to wear on the gear axles. These are solid bushings without balls, suitable even for mechanically demanding builds; the manufacturer specifies use with springs up to M170.
Key Features
Solid Steel Construction
Steel bushings contain no balls or other moving parts and provide solid support for the gear axles inside the gearbox.
Electroless Nickel Plating
The nickel-plated surface reaches a hardness of 660–850 HV (58–63 HRC) and contributes to high wear resistance, corrosion resistance and low friction.
Relieved Contact Surfaces
Relief in the areas contacting the gears reduces the friction surface area and promotes smoother gear operation with lower mechanical losses.
No Lubrication Groove
The bushings have no lubrication groove that could create an edge acting against the gear axle. This design maintains a continuous sliding surface around the axle.
CNC-Machined in the Czech Republic
The bushings are machined on precision CNC machines in the Czech Republic, and the manufacturer recommends them for gearboxes with 9mm bearing seats and springs up to M170.
Technical Specifications
Type: bushings for AEG gearbox
Diameter: 9 mm
Gear axle diameter: 3 ..
En stock, expédié immédiatement
Paracord Bracelet — OD GreenPlus que 1 en stock
En stock, expédié immédiatement
Eat'n ToolPlus que 1 en stock
En stock, expédié immédiatement
SP120 Progressive AEG SpringPlus que 2 en stock
En stock, expédié immédiatement
SP110 Progressive AEG SpringPlus que 3 en stock
Airsoft Bazaar B.V. · Frankrijkstraat 4, 5171 PR Kaatsheuvel · N° de registre du commerce (KvK) 99363534
© Airsoft Bazaar - Tous les droits sont réservés 2026