TM 416 Next gen recoil shock KOA musketeer build

Tokyo Marui 416 DELTA geupgrade bij Kingdom of airsoft komt met 7 magazijnen 6 pts EPM en 1 metalen ! 2Lipos + red dot en flashlight .
Replica is in zeer goede staat en heeft een heerlijke respons en kick .
Voor vragen stuur mij gerust een mail [email protected] oF whatsapp :0654937160

-PDI 6.01 

-Firefly namazu

-Nomad trigger

Recoil Service.
A complete gearbox maintenance and tuning service, specifically tailored to the Tokyo Marui Recoil platform. Includes a range of upgraded components to provide a solid base for the most demanding upgrade packages. Includes the following components:

Custom Lonex Cylinder Head – modified to correct the Angle of Engagement perfectly

Airlab Sorbothane Pad

Prometheus 6mm Steel Bushings

Airlab Viton Piston Head O-Ring And all necessary shims.

BTC MkII Next-Gen Spectre BTC Spectre Installation.
Professional installation of the BTC Fire Control System.
This includes any heatshrink, gearbox modifications and connectors required.
For the TM Recoil platform, this includes a LiPo adapter made from Genuine Deans Ultra wire and a Genuine Deans Ultra connector.
Prometheus Recoil Gears.
Some of the finest and strongest gears available for your Tokyo Marui Recoil.

Prometheus Hard Gears are expertly made to fit and mesh perfectly, which ensures smooth running and extreme reliability.

Eagle6 Recoil Main Spring – M95
Specially designed by Eagle6 for the TM Recoil platform, these Linear springs provide the most consistent power output with superior longevity.

-To give 345-350fps

Eagle6 Recoil Shock Upgrade Spring
Increases the felt recoil in the TM Recoil M4, 416 and 417 platforms. Make it kick!

Prometheus Recoil Air Nozzle
Upgraded Air Nozzle for the TM Recoil gearbox.
Provides an excellent seal thanks to a sealing internal o-ring

Prometheus Steel Cylinder (B)

Polished Steel cylinder from Laylax Prometheus. The finest quality available.

Prometheus Recoil Spring Guide (M4)
The Prometheus EG Recoil Spring Guide is a high quality guide that has both a rotating shaft and thrust bearing, ensuring that the spring can twist unhindered as it is compressed. This reduces spring fatigue, giving a more consistent energy output with less degradation over time.
The Thrust bearing acts to slightly pre-compress the spring, which will raise the fps by up to 3%.
The rotating shaft is made from POM, which serves to reduce the noise from spring vibration between shots.

Prometheus Recoil Piston (M4)
The highest quality piston available for the TM Recoil platform.
Made from an extremely strong polymer with excellent shock absorbing qualities and 4 steel teeth in the critical area.
These pistons are the top choice every time.
Prometheus Recoil Piston Head (M4)
The highest quality Recoil piston head available.
Comes with an internal bearing to allow for friction-free spring compression, a ported face to allow for easy pressure equalization and excellent strength throughout.

KoA Blueprinted Motor.
A fully Blueprinted Custom motor, available in four different speeds.
Blueprinting is the act of taking the motor to it’s design spec or ‘Blueprint’. Motors that are made in a factory, however high the quality control, often leave with imperfections that negatively affect the performance and longevity of the motor.
To Blueprint a motor we:

-Skim the commutator to ensure perfect concentricity

-Balance the Armature

-Shim the Armature in the shell

-Seal the coils and comm attachment points using a specialised potting epoxy

-Bake the armature to harden and improve the thermal properties of the epoxy

Prometheus Purple Hop Rubber.
One of the highest quality Hop Rubbers (Bucking) available.
They retain their shape well under pressure, giving 

Laylax Recoil Frame Lock Pin

Machined Steel front receiver pin for the TM Recoil M4/416/417.

Comes with an o-ring to hold it securely, which prevents binding due to the original c-clip becoming misaligned.

Laylax Recoil Trigger Lock Pin
The Laylax Trigger Lock Pin comes with screw-in ends to prevent it from coming loose and falling out.
Ideal for use with the BTC Spectre.

Laylax Hard Castle Nut.
The CNC machined Aluminium Castle Nut from Laylax.
This ring has deeper, stronger threads to more securely lock the buffer tube in place.
Laylax Hard Inner Stock Support Block (M4, 416 DEVGRU)
Replaces the inner stock support block with this CNC machined once from Laylax.
Helps to prevent the stock from wobbling and allows for a more solid lock. Fits the TM Recoil M4 SOPMOD and HK416 DEVGRU crane stocks.