Advance-LB3 LiPo Balance Charger van het merk Prolux

Still as good as new in box with all accessories. New price of this balance charger was € 45.00.

Specifications:
Powerful, user-friendly and practical charger with integrated balancer, suitable for Lipo and LiFePo batteries with two (7.4V) or three (11.1V) cells. The batteries are charged very reliably and safely, the installed 12 bit microprocessor monitors the charge and prevents overcharging and short circuiting. The charging current can be set to 0.5 ampere, 1 ampere and 2 ampere, with 0.5 ampere being the most economical for the battery. The charging current of 2 amps may only be used for batteries with a capacity of at least 2000 mAh. The charger automatically detects when the battery is full and then stops the charging process. The device then maintains the voltage and signals acoustically and visually that the battery is full.

Important notes for charger operation:
First the charger must be plugged into the wall socket. Then the correct mode (Lifepo for Lifepo batteries and Lipo for Lipo batteries) must be selected. Then the number of cells is selected (7.4V = 2 cells, 9.9V and 11.1V = 3 cells).The battery is then connected to the device. Then Start is pressed for approx. 2 seconds. The charging process starts in 2 seconds. After the charger signals that the battery is charged, the battery is removed from the charger. Only then is the charger disconnected from the socket.