Full custom brushless Calibur 2

THIS REPLICA IS AN HPA KILLER (video available as proof), worthy as its substitute without spending a lung in hpa builds. THE PRICE IS REALLY A BANGER FOR THE EXPERIENCE YOU GET.

Once it arrived to me, all the original parts were swapped out with new custom components and then tested at the NAC to ensure proper function.

This replica delivers excellent performance with a surprisingly snappy and reactive trigger response that makes it perfect for those looking HPA performance but hates tanks and hoses around. The shooting experience feels great thanks to its clean and crisp sound delivered, all this without precocking—you won't even notice the gearbox spinning for how snappy the trigger feels.
despite its compact size, it also performs very well outdoors, delivering 1.2 Joules and good precision in ther distance, making it suitable for every scenario while having its compact size.
in the rear battery compartment you have plenty of space to put your battery, personally i was able to insert an 11.1V 2200 mah 35c gens ace lipo battery.
This replica is ideal for those looking for strong reliable performance and high quality externals and materials as you expect from VFC, combined with a beautiful black finish that is pleasing to the eye. It appeals to any players.

WORK DONE:
AOE corrected
Polished where needed
Short-stroked for better trigger response and crisp sound while avoiding PME
Motor and gearbox alignment
Properly shimmed gears
Air seal control

PARTS USED:
Maple Leaf 6.03 barrel 170mm
4UAD aeg hop up rubber
SHS 12:1 gears short stroked
FPS delayer chip
FPS steel ported cylinder
FPS carbon fiber tappet plate
FPS high ROF POM x-ring piston head
FPS carbon fiber piston
FPS 8mm bushings
FPS cylinder head
SOLINK 28k brushless motor
GUARDER SP spring
TITAN GATE V2

Test Results (performed at the National Airsoft Center):

    Tested with different BB weights (0.25 g, 0.28 g, 0.30 g) using a PTS magazine
    Best results were obtained with BLS 0.3g
    32 RPS with an 11.1V 1300 mAh 20/40C battery (results may vary with different batteries)
    Full auto mag dump completed with no feeding issues
    Maximum range test (replica straight): 60 meters (tested with BLS 0.3gr bbs)

⚠️ PLEASE NOTE: 
Use only high-quality magazines to ensure proper feeding and costant pressure into the nozzle.
use high quality BBs (BLS or G&G) to avoid any malfunction.
this replica is meant to work only with 11.1V LiPo batteries with a minimum of 1450mAh or above, rated at least 30c to ensure stable current supply and prevent voltage drop in full auto.
Recommended BB weight: 0.3 g 
Service the replica periodically to maintain peak performance.

(the PTS magazine shown in the picture is not included).
You will need a USB link to program the Gate unit; however, any changes made afterwards may cause problems if you don’t know what you’re doing, please proceed with caution.